BPXNX - 27 5120 WOOD PRESERVE CLEAR
- MSDS: BPXNX
- Manufacturer: VALSPAR CORP
- Product Name: 27 5120 WOOD PRESERVE CLEAR
- National Stock Number: 8010-00N034322
Product Identification
Product ID:27 5120 WOOD PRESERVE CLEAR
MSDS Date:11/25/1985
FSC:8010
NIIN:00N034322
MSDS Number: BPXNX
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13374
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
LIGROINE; (VM&P NAPHTHA)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 65%
OSHA PEL 300 PPM;400 PPM STEL
ACGIH TLV: 300 PPM
P-MENTHA-1,8-DIENE; (CYCLOHEXENE,
CAS: 138-86-3
RTECS: OS8100000
Fraction By Weight: 5%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HARMFUL IF INHALED. MAY AFFECT
BRAIN, NERVS SYS/RESP SYS, CAUSING DIZZ, HDCH, NAUS/RESP IRRIT.
OVEREXP TO INGS IN PROD MAY CAUSE NOSE & THROAT/EYE/SKIN IRRIT,
ALLERGIC SKIN REACTION. CHRONIC: NO TICE: REPORTS HAVE ASSOCIATED
RPTD & PRLNGD OCCUP OVEREXP TO SOLVS W/PERM BRAIN & NERV SYS DAM.
(EFTS OF OVEREXPOS)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:INHAL: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING HAS
STOPPED, USE MOUTH-TO-MOUTH RESUSCITATION AND GET MEDICAL
ATTENTION. EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:
WASH WITH SOAP AND W ATER. INGEST: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point:103F,39C
Lower Limits:0.70%
Upper Limits:10.6%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:CONTAINS OXIDIZING MATLS. CONTAMD RAGS,
WIPES, SAWDUST, ETC. MAY CATCH FIRE SPONTANEOUSLY.STORE WASTE UNDER
WATER IN CLSD METAL CNTNRS UNTIL DISPOS (SUPP DATA)
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SCBA OR AIRMASK FOR LARGE SPILLS IN A CONFINED
AREA. WIPE UP OR ABSORB ON SUITABLE MATERIAL AND SHOVEL UP. AVOID
ALL PERSONAL CONTACT .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT/SPKS & OPEN
FLAMES.KEEP CNTNR CLSD WHEN NOT IN USE.DO NOT STORE >120F.BASED ON
PROD FL PT & VAP PRESS SUITABLE (SUPP DATA)
Other Precautions:DO NOT CUT, PUNCTURE/WELD ON/NEAR CONTAINER. ALL
LABEL WARNINGS MUST BE OBSERVED UNTIL THE CONTAINER HAS BEEN
CLEANED OR RECONDITIONED. REPORTS HAVE ASSOCIATED RPTD & PRLNGD
OCCUP OVEREXP TO SOLVS W/P ERM BRAIN & NERVS SYS DAM. (SUPP DATA)
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED RESPIRATOR
(NIOSH/MSHA APPROVED) DURING AND AFTER APPLICATION UNLESS AIR
MONITORING VAP/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MFR'S DIRECTIONS FO R RESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN A CONFINED AREA, VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:USUAL HAND PROT FOR PAINT APPLICATION.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: OF IN COMPLIANCE WITH ALL APPLICABLE REGULATIONS. HNDLG/STOR
PREC: STORAGE SHLD BE PROVIDED I/A/W OSHA REG 1910.106. EMPTY
CONTAINERS MAY CONTAIN PRODUCT RESIDUE, INCLUDING FLAMMABLE OR EXP
LOSIVE VAPORS. OTHER PREC: INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING CONTENTS MAY BE HARMFUL/FATAL.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:10 @ 98F
Vapor Density:5.05
Spec Gravity:0.83
Evaporation Rate & Reference:1 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:80.01
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.